Cangzhou Quanheng Imp&Exp Trading Co.,Ltd.
Cangzhou Quanheng Imp&Exp Trading Co.,Ltd 1. Survive by quality, development by credit, and effciency by management. 2. Only quality posesses market, and improvement gets progress. 3. Without
Add to Cart
Hydraulic shaftless mill roll stand
Structural feature:
Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.
Brake adjustable adopts multipoint braking system.
Every stand matched two sets paper car , and they can paper on the both sides at the same time.
Hydraulic system parameters:
1.Work pressure(Mpa):16---18Mpa 2,lifting hydraulic cylinder:100×440mm
3.Clamping hydraulic cylinder:63×1300m 4,hydraulic station motor power:3KW --380V -- 50Hz 5,solenoid valve voltage:220V 50 Hz
Mainly purchased parts, raw materials and origin:
| Name of main parts | Brands or place of origin | material |
| Main shaft | Day steel production | diameter242mm |
| Swing arm | Production by own | Resin sand gray ironHT200 |
| wallboard | Jigang prduction | Q235AWelding parts |
| bearing | HRB,ZWZ,LYC | |
| Toothed chuck | Zhejiang xusheng | 3,4inch shared |
| Main electrical appliance | France Schneider | |
| button | CHINT NP2series | |
| Air switch | French Schneider | |
| Pneumatic components | Zhejiang Sonor CSM | |
| Hydraulic station | Shandong zaozhuang | |
| Brake pump | zhejiang |
Single Facer(fingerless single facer absorption)
Structural Features
* The paper guiding adopts wind adsorption, keeping the stability of flutes under the condition of high speed.
* The corrugated paper is adsorbed to the middle corrugated roller to form a negative pressure zone of 180°and then to finish the rolling of corrugation through the vacuum box by fan.
* The width of suction slot of lower corrugated roller is not more than 2.6mm, able to reduce the stripe mark on single side corrugated cardboard.
* The reducer casing adopts oil bath lubrication and closed gear transmission, reducing the vibration of machine.
* This machine adopts auto-cycle glue supply and pneumatic control glue supply and return, making it be characterized by buffering effect.
* The glue roller surface is treated with special mesh nicking and chrome-plating.
* Upper and lower corrugated rollers are made of 48CrMo high quality alloy steel. After heat-treatment, the rigidity is HRC58-62.The surface is grinded and chrome plated.
* Flute profile: optional by customers.
Materials and Bought-in Components
* Side Wallboards and base: HT200 Place of origin: Hebei
* Base of transmission parts: welded by channel
* Electric motors:
* Main electric motor:5.5kw 1 set, continuous working
* Suction fan: 5.5kw 1 set, continuous working
SC-Sheet cutter machine
Main used for cutting the cylinder paper or single paperboard, corrugated board, cardboard etc carton processing
Features
SC series of cylinder cutting machine, main used for cutting the cylinder paper or single paperboard to quadrangle of needing. And has the characteristics such as easy structure, convenient adjustment, long using life and so on.
Technical parameter
| Parameter | Unit | Specification | ||
| Max.cut width | mm | 1300 | 1700 | 2000 |
| Cut lenghth range | mm | 390-2400 | 390-2400 | 390-2400 |
| Cut paper time | mm | 20-120 | 20-120 | 20-120 |
| Cut thick | 2 | 2 | 2 | |
| Confect electric machine | mm | 4.0 | 4.0 | 4.0 |
| Work speed | mm | 0-70 | 0-70 | 0-70 |
| Fighre dimesion | mm | 2100*2100*1450 | 2100*2100*1450 | 2100*2100*1450 |
| Error | mm | ±3 | ±3 | ±3 |
Samples
