QHCL100-(1400-2200)-5PLY Corrugated Cardboard Making Line
Item:QHCL-100-1400-5ply Corrugated Cardboard Production Line
- Design speed:100m/min
- Economic speed:60-80m/min
- Working width:1400mm
Note: The roll paper which is used to test the production speed should meet following requirements:
- Grade: Min. B
- Moisture content:11% ± 1%
- Face paper:150~200g/ m2
- Liner paper:150~200g/ m2
- Corrugated paper: 105~180g/ m2
- Flute profiles: A, B, or according to client`s requirements
- Steam requirements:
- Steam quantity: 2000Kg/Hr Max. pressure: 1.13Mpa
- Normal pressure: 0.98-1.12MPa
- Electricity: 380V 50Hz three-phase, or four phase
- Equipment Direction:Left or Right transmission will be according to client`s requirements.
Note: Customer`s self –provided parts:
- Steam heating system: one set of boiler of 2000Kg/Hr, pressure 0.98-1.13MPa
- Steam pipelines above valves and steam back, water drainage pipelines
- Compressed air pipelines, glue pipelines
- Power, electrical wire to operation box
- Water pipelines, water barrel
- Water, electricity, steam ground foundation
- Raw material ( paper roll, corn starch, caustic soda, sodium borax) to test machinery
- Engine oil, lubricating oil, hydraulic oil, lubricating and high-resisting lubricating
- Installation and commissioning persons accommodation, and person arrangement
Quality Guarantee
- Quality Guarantee period: one year after final acceptance
- Within the period of quality guarantee, the Seller is obliged to supply technical assistance to the Buyer to ensure normal production. Within the period of quality guarantee, in case of any defects or malfunctions, which have been proven to be caused by Seller’s poor materials, designing errors, and poor fabrication and assembly technology, upon receipt of the Buyer’s information in writing, the Seller will send its technicians immediately.
- Within the period of quality guarantee, in case of any defects or malfunctions, which have been proven to be caused by the Buyer using improper material, mis-operating and maintenance, upon receipt of the Buyer’s information in writing, the Seller will send its technicians immediately. The international air tickets (if necessary), local transportation and accommodation will be borne by the buyer.
Design speed:100m/min |
Normal work speed:60-80m/min |
No. |
Machine name |
Qty |
|
|
Remarks |
1 |
QHMR-1400E Electric Mill Roll Stand |
5 |
|
|
Whole electric control,pneumatic brake |
2 |
Railing and tracks |
10 |
- |
- |
Includes 6m railing and pulley |
3 |
QHSF-280S-1400 Fingerless Single Facer |
2 |
|
|
45alloy corrugated roll, frequency conversion motor, electric adjustable glue width. |
4 |
QHPH-600-1400
Pre-heater
|
2 |
|
|
¢600mm, electric adjust wrapping angle |
5 |
QHPH-600-1400
Pre-conditioner
|
2 |
|
|
¢600mm electric adjust wrapping angle |
6 |
QHDB-1400
Duplex Bridge
|
1 |
|
|
Adsorption type, electric deviation-correcting |
7 |
QHPH-600-1400
Triplex pre-heater
|
1 |
|
|
¢600mm electric adjust wrapping angle |
8 |
QHDG-1400 Duplex Glue Station |
1 |
|
|
Double layers , diameter :188 Pneumatic adjust pressing roller |
9 |
QHDF-1400 Double Facer |
1 |
|
|
Heating plants: 600mm×12, with cooling section 4Mts |
10 |
QHSS-1400 Slitter Scorer |
1 |
|
|
5 blades 8 scores |
11 |
QHNC-1400D NC Cut Off |
1 |
|
|
Straight knives |
12 |
QHAS-1400D Angle Stacker |
1 |
|
|
Output device ,automatic counter |
14 |
Glue making system |
1 |
|
|
Automatic circle glue, pipeline provided by buyer |
15 |
Electric system |
1 |
Whole electric appliance adopt Chint |
16 |
Steam system |
1 |
Pipeline on valves provided by buyer |
17 |
Pneumatic system |
1 |
Air Compressor and Tank |
|